Joe Banks and Charles Badoe represented FSI at the 2014 SIMMAN workshop http://www.simman2014.dk/  held in Lyngby Denmark on 8-10 December.   This workshop series is aimed at benchmarking the prediction capabilities of different ship manoeuvring simulation methods including systems and CFD based methods through comparison with results for container ship, tanker and surface combatant hull form test cases.
This year’s workshop  is following up on the workshop held in 2008, which was the outgrowth of discussions and planning conducted by the 24^th and 25^th ITTC manoeuvring Committees. CFD based methods were compared with both PMM/CMT and free-model test data. Comparisons for PMM/CMT and free model tests were blind in the sense that the PMM/CMT and free-model test data was not provided prior to the workshop unless data was required as input to the simulation method.
The workshop was organised by FORCE, MARIN and IIHR with assistance and support from the 27^th ITTC manoeuvring Committee. Participants of the workshop included, BAE Systems, CNR-INSEAN, ECN/CNRS, Force Technology, Hamburg University of Technology, HSVA, Hyundai Heavy Industries Co. Ltd, Indian Institute of Technology, KAIST, KRISO, MARIN, NMRI, ONR, OSK-Ship Tech, Shanghai Jiao Tong University, Technical University of Berlin, University of Genoa, University of Iowa, University of Michigan, University of Southampton, Wiki Ltd and University of Zagreb and Wuhan University of Technology.
University of Southampton submitted a paper entitled ‘Comparison of various approaches to numerical simulation of ship resistance and propulsion’ by Badoe, C., Winden, B., Lidtke, A.K., Phillips, A.B., Hudson, D.A. and Turnock S.R. The full paper can be found at http://eprints.soton.ac.uk/369875/.
 

Another stepping stone in place with the successful installation of the new wave maker last week.

We had a preview of the work underway in the new hydrodynamics facility last week when visited by the epsrc representative for the national wind tunnel facility who are part funding the development.

THURSDAY 11/12/2014 12:00-13:00 B175/1025 Boldrewood Innovation Campus
We are very pleased to invite Professor Joerg Fliege, Director of CORMSIS (Centre for Operational Research, Management Science and Information Systems) at the University of Southampton to deliver an invited seminar on “The successful case of the optimizer WORHP”
WORHP – We Optimize Really Huge Problems. Professor Fliege was part of  the development team of the WORHP optimization solver and its processor FGS Toolbox, where he led the development of the multiobjective add-on FGS-MCS. He is presently part of the project team of AWACS (Adaption of WORHP for Avionics Constraints), where he is leading the extension of WORHP to multiobjective problems.
 

This year, two representatives from Southampton FSI attended ICHD in October. James Hawkes presented work on linear solvers for CFD; and Puram Lakshmynarayanana presented an evaluation of hydrodynamic coefficients of a barge using CFD. The conference was hosted at Nanyang Technological University, in Singapore. The venue was close to the International High Performance Computing Centre (IHPC) to which Southampton have strong ties. A seminar was given at IHPC following the conference.

The conference covered a very broad range of hydrodynamics applications – from classical ship hydrodynamics, propeller interactions and cavitation, to coastal pollution flows and flooding simulations. There were four parallel sessions, focusing on different research areas, over the course of four days.
In the ship hydrodynamics sessions there was a strong focus on seakeeping experiments and simulations. There were also interesting presentations focused on manoeuvring, wind-assisted propulsion and sloshing effects.
The two Southampton participants both presented in the Computational Fluid Dynamics session. The session was started by a particularly interesting plenary session by Professor Frederick Stern (University of Iowa) on the recent progress in CFD – looking at simulations for naval architecture and ocean engineering. The CFD sessions were not limited to ship hydrodynamics, and included presentations on acoustic noise simulation from granular sand dune flows; numerical studies on flexible hydrofoils; hull-shape optimization algorithms; and Lagrangian particle simulations of lock-exchange flows.
The full proceedings will be available soon, at http://www.ichd2014.org .

Many of you will be aware of the Advanced Technology Partnership that the University has with the Royal National Lifeboat Institution on Maritime Engineering and Safety (RNLI ATP). One important facet of this relationship is an annual public lecture delivered by a pre-eminent speaker on a topical subject. This year we are pleased to welcome double Olympic gold medallist and TV presenter, Shirley Robertson OBE, as our speaker for the 2014 RNLI ATP Lecture to be held on Wednesday, 3rd of December at the Turner Sims Concert Hall at 6pm.
Refreshments will be served in the foyer from 5:30pm.
For further information please visit the webpage:http://www.southampton.ac.uk/engineering/news/events/2014/12/03_the_rnli_lecture.page
55225_RNLI lecture poster A4_WEB
We look forward to seeing you at this event

We are very pleased to invite Professor Mike Hinto, Technology Director of National Composites Centre (NCC) to deliver our FSI/SMMI/LR and material group joint seminar on
The World–Wide Failure Exercises: Strength Prediction  Is NOT EASY …. but We’re Getting There ! 
NCC is one of seven UK Government sponsored ‘High Value Manufacturing Catapult Centres’. Prof. Hinto has more than 40 years of experience of working on programmes on composite materials and structures.
This joint seminar will stimulate discussions and close interaction between academics from different research groups of engineering faculty at the university and the specialists from LR on this interested topic.
Date:   Friday, 5th December 2014 
Room: Boldrewood campus B175 Seminar Room 1025
Time:   11:30-12:30