The Magazzini Simplified #buildyourownportus

Click to view slideshow.

Yesterday I returned to the Lego model of the Grandi Magazzini, that I was building in Lego Digital Designer last year. We’ve got an idea to do a day of modelling during the upcoming 25th Festival of Archaeology. Obviously, we’ll cover the “proper” modelling (CGI and 3D printing for example) as well as Lego, but I thought it would be fun to enable every visitor to the department to make at least one of the “warehouse units” and, over the course of the open day, build up more and more towards the complete Grandi Magazzini.

But to do that, I need to redesign my model. Not all the pieces I used in Lego Digital Designer are actually available. For example, my first model made extensive use of a “BRICK WITH BOW 1x6x2″ arch, which isn’t currently available – but more on that later. I needed to redesign the model using only bricks (and colours) that are available on Lego’s pick-a-brick custom order service.

But not only that, I wanted to make it slightly easier to build physically – my previous model would not have allowed for building a single unit and then plugging it on to the main model, at least not without some deconstruction. I alos wanted to use fewer bricks. They are not cheap on the pick-a-brick service.

With those three aims, I set about remaking the model, sticking as much as possible to the dimensions of my previous attempt which, a little bit through judgement, but also with a lot of luck, just about managed to keep to the one stud per metre scale I’d decided upon.

I lost some of the detail in the bricks I couldn’t use, but the most missed brick was the BRICK WITH BOW 1x6x2, which was a lovely Romaneque arch. I had to replace it, in most places with two half-arches. In some places it actually worked better the arches of each floor’s colonnade are now closer to the 5.2 metre width that the evidence points to. The 1x6x2 brick restricted each opening to a width of just four metres. Inside though, the “vaulting” on the rearmost room looks distinctly “gothic”. I decided I could live with that, but the same thing happens on top floor of the rear external walls. Those half-arch bricks are relatively efficient, cost-wise, so I’ve retained them on that rear wall for the time being. But I fear their impact in multiplicity, across the exterior might give the wrong impression, it might make the building look like a monastery, more ecclesiastical than mercantile.

Its funny isn’t when visualizing something, how you have to be aware of the interpretations that people bring with them to the visualisation. If people had never seen gothic architecture, I might be happier to leave these arches as they are. But I have another idea involving a shallower arch, which while still not “Roman” in shape, may be less of a compromise. This solution will look more 19th century industrial, but perhaps that “industrial” interpretation is closer to what we think was the original use of the building.

Right now though, I’m leaving it as is. Its time to move away from the computer and the theory, and try to build what I’ve designed in real life. So I’ve ordered the required bricks from Lego (for £25 including postage) and when they arrive I’ll see how easy it is for my boy (our target market for this I’m sure) to put together.